SY-200: How do I set EXP to control the Wet and Dry signal?

It's possible to control parameters in the SY-200 that are controlled by the D. LEVEL, E. LEVEL and PARAM 1-3 knobs. You can use MULTI Mode to assign the expression pedal to control parameters simultaneously.

Below are the Steps to set the expression pedal controls in MULTI mode: 

1. Press the MENU button, and then press KNOB 3 to enter the "EXP PEDAL FUNCTION" menu. 
2. Turn KNOB 2 until "MULTI" is displayed next to the FUNCTION on-screen. 
3. Press the MEMORY knob.  You are now setting the MIN value for the expression pedal. 
4. Turn the MEMORY knob clockwise to display D.LEVEL and E.LEVEL. This is direct and effect level controls. 
5. Turn KNOB 1 to set the D.LEVEL to the desired minimum value. 
6. Press the MEMORY button again. You are now setting the MAX value for the expression pedal. 
7. Turn KNOB 1 and 2 to set the D.LEVEL and E.LEVEL to desired maximum value. 
8. Press the MEMORY knob. "COMPLETE!" appears in the display. 

You have now set multiple parameters to be controlled via the EXP in on SY-200. To store the new settings, use the WRITE function and save them to a desired User Memory location. MULTI control mode is not available as a system setting.