Yes. The INPUT A (MONO) and INPUT B jacks on the SL-2 can also be used to input signals from a mic, keyboard and so on. Check the following points before you connect a mic or keyboard.
| Type of mic | Use a dynamic mic. |
|---|---|
| Audio cables | Use audio cables that do not contain resistors. |
| Input level |
The nominal input level for the INPUT A (MONO) and INPUT B jacks is -20 dBu. The sound may distort if this level is exceeded. If your input device outputs at a low level, insert an amp, mixer or similar equipment into the signal chain if necessary. |
| Input volume adjustment |
The input sensitivity can’t be adjusted on the SL-2. Adjust the volume using the input device. |