GP-6: Restoring the Factory Settings (Factory Reset)

You can restore the factory settings of the GP-6 by performing a factory reset.

Note: Factory Reset erases all settings that you have stored, and returns them to the factory-set condition. For details on the settings that are reset, refer to “Settings Saved Even If the Power Is Turned Off” in the GP-6 Owner's Manual.

Memo: Executing this function does not erase the files in internal memory or on a USB flash drive (commercially available). If you want to erase all files from internal memory or from a USB flash drive, refer to “Initializing the Memory (Format Media)” in the Owner's Manual.

Follow the steps below:

1. Press the [] button.
   The [] button is lit, and the piano is in function mode.
2. Press the [–] [+] buttons to access the “Factory Reset” screen and then press the [] button.
   A confirmation message appears.
   
   If you decide to cancel, press the [] button.
3. Press the [–] [+] buttons to select “Yes”, and press the [] button to execute.
   This performs the factory reset.
   NOTE: Never turn off the power, disconnect the USB flash drive, or unplug the power cord while the screen indicates “Executing...”.
4. When the display indicates “Power off, then on”, turn the power off and then on again.
   Caution: Never turn off the power, disconnect the USB flash drive or unplug the power cord while the indicator of GP-6 shows that an operation is in progress.