Yes. The Acoustic Singer Pro and Acoustic Singer Live can be connected to an external speaker or PA system using the DI/LINE OUT jacks on the rear panel. This output is commonly used for analog recording to a DAW/audio interface while monitoring the sound from this unit, or for sending sound to a PA or house system.
- Connect an XLR cable to the DI/LINE OUT jack and then to your PA system or external speaker.
- MIC/MIX jack: Use this to output the MIC channel signal, or a mix of the MIC and GUITAR channels.
- GUITAR/MIX jack: Use this to output the GUITAR channel signal, or a mix of the GUITAR and MIC channels.
Use the [OUT SELECT] switch to choose between sending a dry DI signal or a signal with internal effects applied.
Use the DI option when you want to send a dry signal or separate the MIC and GUITAR signals.
- MIX: Both channels pass through their respective effects, are mixed, and output. The AUX input is also included.
- POST EFX: Both channels pass through their respective effects and are output separately.
- DI: Both channels bypass effects and are output separately. Use this option to send a dry signal or to separate the MIC and GUITAR signals.
- Adjust the output level using the [VOLUME] knob of each channel.