The following procedure can be used to clear the internal memory and reload the factory settings:
(CAUTION: All USER information will be lost. Be sure to back up any information you wish to keep.)
1. Turn off the power of the FC-200.
2. While holding down the #10 pedal, turn on the power.
3. Release the #10 pedal then press the CTL pedal.
(CAUTION: All USER information will be lost. Be sure to back up any information you wish to keep.)
1. Turn off the power of the FC-200.
2. While holding down the #10 pedal, turn on the power.
3. Release the #10 pedal then press the CTL pedal.