Use the following procedure to set the FC-200s MIDI transmit channel:
1. Turn off the power of the FC-200.
2. While holding the CTL pedal, turn the power ON.
3. Press pedals 2 or 3 to select "Ch."
4. Press the BANK UP or BANK DOWN pedals to select the desired MIDI channel (1-16).
5. Press the CTL pedal to store the new setting.
1. Turn off the power of the FC-200.
2. While holding the CTL pedal, turn the power ON.
3. Press pedals 2 or 3 to select "Ch."
4. Press the BANK UP or BANK DOWN pedals to select the desired MIDI channel (1-16).
5. Press the CTL pedal to store the new setting.