If you are using a DVD/Blu-ray player as one of your inputs you need to make sure that the HDCP feature is “ENABLED” on the Input the device is plugged into. Additionally you must “ENABLE” HDCP on the HDMI outputs that you intend on sending that particular signal out from.
For Example: You are sending a Blu-ray players HDMI out into Input 1. So you have to ENABLE HDCP for Input 1. You want to send that signal to two 2 TV’s. So you have to ENABLE HDCP on those two outputs that you want to source the 2 TV’s with.
NOTE: HDCP will only display on HDCP compliant devices and TV’s.