Use the following procedure to set-up the AE-7000 for use with the VM-3100Pro:
1. With the power off to all devices, connect the VM-3100Pro to the AE-7000 with the R-BUS cable.
2. Turn on the AE-7000, then the VM-3100Pro.
3. Press CLOCK SOURCE on the AE-7000 to select R-BUS as the sampling clock.
Set up the VM-3100Pro as follows:
4. Press the SYSTEM/CONTRAST button.
5. Use the TIME/VALUE dial to select INTERNAL.
6. Press LEVEL METER to exit.