If the 'MOTION SENSING' is set as the condition for automatically returning back from the standby mode (detection method), then the transmitter's battery indicator will turn dark upon entering the standby mode.
The battery indicator status during the standby mode depends on the detection method, which can be set to MOTION SENSING (factory default) or SOUND SENSING. See below:
|State of the battery indicator
If the transmitter that’s plugged into the bass is powered-on, the unit automatically enters standby mode if no vibration is detected for a certain interval of time.
If the transmitter that’s plugged into the bass (instrument) is powered-on, the unit automatically enters standby mode if a silent state in which the bass (instrument) is not played continues for a certain interval of time.
|Blinking green (every 8 sec.)
* When you change the setting, plug the transmitter into the WAZA-AIR BASS unit. AUTO WIRELESS CONNECTION will operate, enabling the setting.