LX-9: Restoring the factory settings (Factory Reset)

You can restore the settings saved on the Roland LX-9 to their factory-set state using Factory Reset.

NOTE: Factory Reset erases all settings that you have stored, and returns them to the factory-set condition. For details on the settings that are reset, refer to “Settings saved even if the power is turned off” in the LX-9 Owner's Manual.

MEMO: Executing this function does not erase the files in internal memory or on a USB flash drive. If you want to erase all files from internal memory or a USB flash drive, format the media ( > Format Media > USB Memory).

1. Press the [] button.
   The [] button is lit, and the piano is in function mode.
2. Use the [–] [+] buttons to select “Factory Reset” and then press the [] button.
   A confirmation message appears.
   
   If you decide to cancel, press the [] button.
3. Use the [–] [+] buttons to select “Yes”, and press the [] button.
   This performs the factory reset.
   NOTE: Never turn off the power, disconnect the USB flash drive, or unplug the power cord while the screen indicates “Executing...”.
4. When the display indicates “Power off, then on”, turn the power off and then on again.