HP605, HP603A, HP603: How to record audio?

In this article, we will show you how to record your performance as audio. The recorded song can be used on your computer.
* The acoustic projection effect is not reproduced for an audio-recorded song.

Getting ready to record

1. Connect your USB flash drive (sold separately, up to 32 GB) to the USB Memory port.
   * Audio data can’t be stored in internal memory.
2. Select the tone that you want to play.
3. Hold down the button and press the [+] button to select “Audio.”
   MEMO: You can also specify this via the Function mode “Recording Mode” setting.
4. Press the button.
   The button lights, the button blinks, and the unit enters record-standby mode.
   If you decide to cancel the recording, press the button once again.
   NOTE: Never turn off the power or disconnect the USB flash drive during recording.
5. You can sound the metronome if you like.

Starting your recording and saving it

1. Press the button.
   Recording starts.
   When recording starts, the button and button light.
2. Press the button.
   Recording stops, and your performance is automatically saved.
   MEMO:
   - You can change the name of the song.
   - You can delete the song.

Listening to the recorded performance

After you record, the newly recorded song is selected.

1. Press the button.
   Playback starts from the beginning of your recorded performance.