If the WAZA Tube Amp Expander Core (W-TAE CORE) is not producing sound, check the following:
- Ensure the [SPEAKER OUT], [LINE OUT], or [PHONES] knob on the W-TAE CORE is not turned down too low.
Note: When a plug is connected to the PHONES jack, no signal is output from the TO SPEAKER jack. - Verify that the LEVEL of the external effect connected to the FX LOOP is set appropriately.
- Check that the foot volume connected via MIDI is not set too low.
Check the Following in the WAZA Tube Amp Expander Core editor
- Confirm that the LEVEL settings for various effects in the editor are not set too low.
- Make sure the MIC MUTE for CAB/MIC SIMULATION is not turned ON.
- Check that the VOLUME MAX parameter (Value: 0-100) in MENU > FOOT VOLUME is set to an appropriate level.