Roland Switchers: How to Set Up Clean HDMI Output on your Camera – Roland Corporation

Out of the box, some Camcorders and DSLR cameras may not output a compatible signal with your Roland switcher. This can easily be corrected with your camera settings, but note that not all DSLR cameras are capable of a clean HDMI output at a compatible resolution, especially older models.

This is a camera issue and not a Roland switcher issue. If you connect a DSLR to your switcher and see the camera's settings overlay, unplug it from the Roland switcher and connect directly to a TV, and you will see the same settings overlay.

Most Roland switchers have an input status menu, this allows you to see what the incoming resolution and frame rate is from the camera. This is useful for troubleshooting, as it will take a lot of the guesswork out. More information is available in the manual for your product.

Note that the original V-1HD does not have this feature in the menu, but the input buttons will flash white if there is a compatibility issue.

There are so many camera models out there, but this guide will try to help you navigate camera setup. It will start with some general guidelines, followed by a list of cameras and their recommended settings.

Listed cameras may not be tested by Roland; listings based on customer inquiries and feedback.
This list does not guarantee camera compatibility with all Roland switcher models.
Listed camera settings and camera documentation subject to change.

If you have success with a particular model and want to share that information, please e-mail support via Roland Backstage and we will review it.

How to Setup Clean HDMI Output

First, connect your camera's HDMI output to an input on your Roland switcher. If the resolution is compatible, it should display an image.

There are two types of inputs on Roland switchers, Standard and Scaling:

Standard inputs will cross-convert, but will not up or down convert the resolution.
- This allows 1080i input and 1080p output, but not 720p input and 1080p output.
Scaling inputs will take multiple compatible resolutions and convert to the output resolution.
- For an example, check out the V-8HD's Specifications Page, and under "Supported Video Input Formats", note how many more resolutions inputs 7 and 8 support.

Depending on your workflow and other equipment in your video system, you likely have the Roland switcher outputting a 1080P resolution at either 50 Hz or 59.94 Hz, depending on your country's standard.

The U.S. uses 59.94.

List of Cameras and Recommended Settings

Below is a list of cameras that are capable of clean HDMI output at 1080P 59.94, and their relevant settings.

Page numbers referenced are subject to change if the manufacturer updates the manual.

List of Manufacturers:

Canon
Nikon
Panasonic
Sony

Canon

EOS M6 MK II

1080P 59.94 HDMI Output:
- Menu > Wrench Icon > Page 3 > HDMI Resolution > 1080p (p.511)
Clean HDMI Output:
- Menu > Camera Icon > Page 5 > HDMI Info Disp > Clean FHD Output (p.280)

EOS M50

1080P 59.94 HDMI Output:
- Menu > Wrench Icon > Page 3 > Video System > NTSC (p.290)
- Menu > Wrench Icon > Page 3 > HDMI Resolution > FHD 1080 59.94P (p.290)
Clean HDMI Output:
- Press the Info button on the back of the camera

EOS R6

1080P 59.94 HDMI Output:
- Menu > [Wrench Icon / Page 4] > HDMI Resolution > 1080P (p.737)
- Menu > [Play Icon / Page 5] > HDMI HDR Output > Off (p.541)
Clean HDMI Output:
- Menu > [Camera Icon / Page 8] > HDMI Display > [TV Icon] (p.351)
- [Info Button] (p.352)

Rebel SL1 (100D)

Rebel T2i

Rebel T3i

Warning: These models will not output usable HD video, even with MagicLantern firmware.

Rebel T6i

Warning: This model does not support 1080P 59.94. Try 1080P 29.97, but note that not all Roland switchers support this format on a standard input, so also try a Scaling input, if available.

1080P 29.97 HDMI Output:
- Menu > Movie Rec. Size > FHD 1920x1080 (p.233)
- Menu > Movie Rec. Size > Frame Rate 29.97P (p.233)
- Menu > Video System > NTSC (p.380)
- Menu > Wi-Fi/NFC > Disable (p.380)
Clean HDMI Output:
- Press the Disp. button on the camera (p.61)

VIXIA HF G20

1080P 59.94 HDMI Output:
- Menu > System Setup [Wrench Icon] > HDMI 1080p Output > On (p.147)
Clean HDMI Output:
- Menu > System Setup [Wrench Icon] > Output Onscreen Displays > On (p.146)

VIXIA HF G40

1080P 59.94 HDMI Output:
- Menu > System Setup [Wrench Icon] > HDMI Output > 1080P (p.148)
Clean HDMI Output:
- Menu > [Disp. Button] (p.89)

VIXIA HF G50

1080P 59.94 HDMI Output:
- Menu > Recording Setup > MP4 Resolution > 1920x1080 (p.99)
- Menu > Recording Setup > MP4 Frame Rate > 59.94P (p.99)
  - Refer to the chart on Page 90 if you want to record internally at 4K but still output HD
- Menu > Display Setup > HDMI Scan Mode > P (p.102)
- Menu > Display Setup > HDMI Max Resolution > 1080P (p.92)
Clean HDMI Output:
- Menu > Display Output > Output Onscreen Displays > Off (p.102)

VIXIA HF G60

1080P 59.94 HDMI Output:
- Menu > Recording Setup > MP4 Resolution > 1920x1080 (p.40)
- Menu > Recording Setup > MP4 Frame Rate > 59.94P (p.40)
- Menu > Display Setup > HDMI Scan Mode > P (p.95)
- Menu > Display Setup > HDMI Max Resolution > 1080P (p.95)
Clean HDMI Output:
- Menu > Display Output > Output Onscreen Displays > Off (p.106)

XA10

1080P 59.94 HDMI Output:
- Menu > System Setup > HDMI 1080P Output > On (p.152)
Clean HDMI Output:
- Menu > System Setup > Output Onscreen Displays > Off (p.150)

XA11 & XA15

1080P 59.94 HDMI Output:
- Menu > System Setup > HDMI Output > 1080P (p.124)
Clean HDMI Output:
- Menu > System Setup > Output Onscreen Displays > Off (p.124)

XA20 & XA25

1080P 59.94 HDMI Output:
- Menu > System Setup > HDMI Output > 1080P (p.149)
Clean HDMI Output:
- Menu > System Setup > Output Onscreen Displays > Off (p.149)

XA30 & XA35

1080P 59.94 HDMI Output:
- Menu > System Setup > HDMI Output > 1080P (p.153)
Clean HDMI Output:
- Menu > System Setup > Output Onscreen Displays > Off (p.153)

XA40 & XA45

1080P 59.94 HDMI Output:
- Menu > Display Setup > HDMI Scan Mode > P (p.94-95)
- Menu > Display Setup > HDMI Max Resolution Setting > 1920x1080 (p.94-95)
- Menu > Recording Setup > MP4 Frame Rate > 59.94 (p.106)
Clean HDMI Output:
- Menu > Display Setup > Output Onscreen Displays > Off (p.108)

XA50 & XA55

1080P 59.94 HDMI Output:
- Menu > Display Setup > HDMI Scan Mode > P (p.105, 108)
- Menu > Display Setup > HDMI Max Resolution Setting > 1920x1080 (p.105, 108)
Clean HDMI Output:
- Menu > Display Setup > Output Onscreen Displays > Off (p.120)

Nikon

Coolpix B500

Warning: This model may not output live video, the HDMI appears to be for still/movie playback only (p.92)

1080P 59.94 HDMI Output:
- (Shooting Mode) Menu > Camera Icon > Movie Options > 1080/60i (p.122)
Clean HDMI Output:
- Press the DISP button on the back of the camera (p.4)

D3200

1080i 59.94 HDMI Output:
- Menu > HDMI > Output Resolution > 1080i (p.124)
Clean HDMI Output:
- Press the INFO button on the back of the camera (p.85)

Panasonic

AG-CX350

1080P 59.94 HDMI Output [Link]:
- Menu > System > Frequency > 59.94
- Menu > System > Rec Format > 1920x1080
- Menu > Video Out/LCD/VF > HDMI Out > Out Format > 1920x1080 59.94p
Clean HDMI Output [Link]:
- Menu > Video Out/LCD/VF > Indicator

AG-UX90

1080P 59.94 HDMI Output:
- Menu > Output Setup > Resolution > 1080P (p.120)
Clean HDMI Output:
- Menu > Disp Setup> Video Out OSD > Off (p.119)

Lumix S1

1080P 59.94 HDMI Output:
- This setting should be automatic and not need to be adjusted on the camera.
- If you have any issues, try this setting:
  - Menu > Settings > IN/OUT > TV Connection > HDMI Mode (Playback) > 1080P (p.357)
Clean HDMI Output:
- Menu > [Movie Camera Icon] > [Back of Camera Icon] > HDMI Rec Output > Info Display > Off (p.253)

Sony

a3000

1080i 59.94 HDMI Output:
- Menu > Image Size > Record Setting > 60i 24M(FX) (p.49)
- Note: 1080i only
Clean HDMI Output:
- Menu > Camera > LCD Display (DISP) > No Disp. Info (p.51)

a5100

Note: Set the dial to Movie mode to get the best quality HDMI output (link)

1080p 59.94 HDMI Output:
- Menu > Setup > HDMI Settings > HDMI Resolution > 1080p (link)
- Menu > Camera Settings > File Format > XAVC S (link)
- Menu > Camera Settings > Record Setting > 60p 50M [XAVC S] (link)
Clean HDMI Output:
- Menu > Setup > HDMI Settings > HDMI Info. Display > Off (link)

a6000