To do a Factory Reset, first make sure that the HDMI MONITOR (Menu) output is connected to a TV or display.
Then, go to: MENU > SYSTEM > FACTORY RESET
If you are unable to boot your VR-1HD or see it's output, try this alternate factory reset:
- Turn off the power.
- Hold down AUDIO EFFECTS 1 and turn on the power without letting go.
- When all LEDs simultaneously flash, let go of AUDIO EFFECTS 1.
- When ON AIR and INPUT 1 light up, the factory reset is complete.
- Turn off the power, wait a few seconds, and turn on the power again.