M-5000: Restoring to Factory Settings (Initializing the Mixer Setting))

The following steps will guide through restoring the factory settings (initializing).

Performing initialization causes all data to be lost. Data that is needed can be saved to a USB flash drive:
Backing Up Data to a USB Drive
Restoring Data from a USB Drive

1. Turn off the M-5000.
2. Go to the Display section on the top panel, and while holding down the [MENU] button and [VIEW] button, turn on the power to the M-5000.
3. Tap <FACTORY INITIALIZE>. A popup prompting you to confirm the initialization operation is displayed.
4. Tap <INITIALIZE>. Initialization starts.
   Note: The factory reset will require approximately 10 minutes.
5. When “Factory Initialize completed.” appears, tap <OK>.
6. Turn off the power.