M-5000: Setting Up Aux Send Points (Pre or Post)

The following article will guide through setting Aux send points.

Setting up the Aux send point for all input channels

1. Press the MENU button and the select ALL CH SEND POINTS.
2. Select the desired send point for all input channels of an Aux:
   
   
3. Select SET to save the settings.

Setting up the Aux send point for individual input channels

1. Press the SEL button for an input channel.
2. Select the SENDS Tab for the channel.
   
3. Touch a desired row of Aux sends.
   
4. Use the assignment knobs and buttons to adjust send level and turn ON/OFF the send.
   
5. To change the send point for any Aux send, press the SHIFT button so that it illuminates and then press the assignment button for the Aux send.