V-160HD: Displaying Multiple PinP Inset Screens

You can use PinP & KEY 1–4 at the same time to display four inset screens.

This example shows you how to composite video using “PinP & KEY 1.” The operation is the same when using “PinP & KEY 2–4.”

Follow the steps below.

1. Press the PinP & KEY 1 [SOURCE] button to turn it on (the button lights up).
2. Press the PinP & KEY SOURCE [1]–[10] buttons to select the video you want to use for the inset screen.
   When selecting a video not assigned to INPUT 1–10, set this from the [MENU] button -> “PinP & KEY” -> “PinP & KEY 1” -> “PinP SOURCE.”
3. Press the PinP & KEY 1 [PVW] button to turn on the inset screen preview output.
   - The inset screen appears in the PVW section of the multi-view, allowing you to check the inset screen’s location and size. At this stage, the final output has not yet been changed.
4. Adjust the inset screen using the PinP & KEY 1 [POSITION H] [POSITION V] knobs.
   
   • [POSITION H]: Adjusts the horizontal position of the inset screen.
     Turn while pressing: Adjust size of the inset screen.
   • [POSITION V]: Adjusts the vertical position of the inset screen.
     Turn while pressing: Adjust zoom ratio of inset screen video.
5. Press the PinP & KEY 1 [PGM] button to turn on PinP compositing (lit).
6. To turn off PinP compositing, press the PinP & KEY 1 [PGM] button once again.