If you want to input HDCP-protected video from a BD player or other device, you can enable HDCP input.
- If you want to output copy-protected (HDCP) video or audio, connect a device that supports HDCP.
Follow the steps below.
- [MENU] button -> “SYSTEM” -> select “HDCP,” and press the [VALUE] knob.
- Use the [VALUE] knob to select “ON,” and press the [VALUE] knob.
- A change in the setting is not applied until you press the [VALUE] knob to confirm. - Press the [MENU] button to close the menu.
- Video/audio from the SDI OUT connectors and the USB STREAM port are not outputted.