FP-30X: Restoring the factory settings (Factory Reset)

You can restore the factory settings of the FP-30X by performing a factory reset.

Note: When you execute a factory reset, all settings will be initialized and the song you recorded in internal memory will be erased.

1. Turn off the power.
2. While holding down the [Function] button, turn the power on.
   
   Important: Keep holding down [Function] button for at least three seconds.
   The (PLAY/STOP) button and the (RECORD) button will blink.
   If you decide to cancel, press the (PLAY/STOP) button
3. To execute the Factory Reset, press the (RECORD) button.
   When the LEDs light up as shown below, the operation is complete.
   
4. Turn the power off, then on again.

If you have an FP-30, refer to this article: FP-30: Restoring the factory settings (Factory Reset)