The Format Media operation erases all data saved in the FP-60's internal memory or on a USB flash drive (sold separately).
– All data saved in internal memory or on the USB flash drive will be erased when you initialize the media.
– If you want to restore all registrations and internally saved settings to the factory-set condition, see the related Q&A "Factory Reset".
Perform the steps below:
- If you want to initialize a USB flash drive, connect the USB flash drive to the USB Memory port.
- Press the [Function] button, and then use the [<] [>] buttons to select “Format Media.”
- Press the [Function] (Enter) button.
– The Format Media screen appears.
If you decide to cancel, press the [Exit] button. - Use the [–] [+] buttons to select the media that you want to format.
- Press the [Function] (Enter) button.
– A confirmation message appears.
– If you decide to cancel, press the [Exit] button. - Use the cursor [J] (right) button to select “Yes,” and then press the [Function] (Enter) button.
– The memory is formatted.
NOTE: Do NOT turn off the power or disconnect the USB flash drive while “Executing...” is displayed. - Press the [Exit] button several times to exit Function mode.