If you can’t connect the DUAL CUBE LX to the DUAL CUBE LX Editor, the mobile device might be connected to “DUAL CUBE MIDI”, which you can check from the Bluetooth settings screen of your mobile device.
Follow the steps below to redo the connection.
- Delete (unpair) the “DUAL CUBE MIDI” connection on the Bluetooth settings screen of your mobile device.
iOS: Tap the “i” located beside “Connected”, and then “Forget This Device”.
Android: Tap the gear icon for “DUAL CUBE MIDI” shown in “Paired devices”, and tap “Unpair”. - On your mobile device, switch Bluetooth off and then on again.
- Press the pairing button of the Bluetooth Audio MIDI Dual Adaptor (hereafter “BT-DUAL”) for at least three seconds.
The BT-DUAL pairing indicator blinks rapidly. - Open the Bluetooth settings screen on your mobile device and connect to “DUAL CUBE Audio”.
*If you accidentally connect to “DUAL CUBE MIDI”, go back to step 1 to redo. - Launch the DUAL CUBE LX Editor.
- Tap [Bluetooth MIDI Device] on the Bluetooth settings screen.
- Tap [DUAL CUBE MIDI].
If the display still shows “Connecting...” on the scan screen and does not change, completely quit the DUAL CUBE LX Editor app and start again from step 2. - If you see an asterisk (“*”) for “DUAL CUBE MIDI”, return to the previous screen and tap [OK].
For details on how to connect, refer to “Connecting the DUAL CUBE LX Editor iOS App to the DUAL CUBE LX” or “Connecting the DUAL CUBE LX Editor Android App to the DUAL CUBE LX”.