You can save up to 16 still images to the internal memory of the VR-120HD that you’ve loaded from an SD card or a USB flash drive. You can assign the still images to channels once you’ve loaded them, even after disconnecting the SD card or USB flash drive.
* Still images saved on this unit remain in memory even after the power is turned off.
* Save the still image files (in the correct format for importing) to the root directory of an SD card or USB flash drive that was formatted using the VR-120HD.
* You can also capture a still image from the input/output video and save it to this unit. See “Capturing a Still Image from Input/Output Video” in the VR-120HD Reference Manual for details.
Follow the steps below.
- Save the still image in the root directory of the SD card or USB flash drive.
- Insert the SD card into the SDXC card slot.
* When using a USB flash drive, connect the USB flash drive to the USB HOST port. - [MENU] button -> “Still Image” -> “Load From Storage” -> select “Still Image” and press the [VALUE] knob.
- Use the [VALUE] knob to select where to load the still image (Still 1–16), and press the [VALUE] knob.
- Press the [EXIT] button to return to the previous screen.
- Use the [VALUE] knob to select “Load”, and press the [VALUE] knob.
A list of the still images on the storage media is shown. - Touch the filename of the still image you want to load.
A confirmation message appears. - Use the [VALUE] knob to select “OK”, and press the [VALUE] knob.
The still image is loaded into the unit. When it is finished, the message “Completed” appears. - Press the [MENU] button to close the menu.