It is often necessary to set or alter the amount of time between the end of the phrase playback and when the control output operation begins. Use the following procedure to set the control output offset time:
1. Use the SELECT dial to select the desired phrase.
2. Press MODE. The MODE indicator will light.
3. Use the SELECT dial to select "1.3. Control Output."
4. Press the SELECT dial.
5. Use the SELECT dial to enable or disable the control output (on/off).
6. Use the SELECT dial to set the delay time (0-59 minutes 59 seconds).
7. Press ENTER.
8. Press the SELECT dial.
9. Use the SELECT dial to select "SET."
10. Press ENTER.
11. Press MODE. The MODE indicator will go off.