Use the following procedure to set-up the ADA-7000 for use with the VSR-880:
1. With the power off to all devices, connect the VSR-880 to the ADA-7000 with the R-Bus cable.
2. Turn on the ADA-7000, then the VSR-880.
3. Press CLOCK SOURCE on the ADA-7000 to select R-Bus as the sampling clock.
Set up the VSR-880 as follows:
4. Hold down SHIFT and press SYSTEM. "SYS SYSTEM PRM?" will appear in the display.
5. Press ENT/YES.
6. Use the TIME/VALUE dial to select SYS MasterClk=INT.
7. Press ENT/YES to confirm the setting.
8. Press PLAY/DISPLAY to exit.