The AR-100 provides a 25 pin connector for control interface. This is labeled Cont. B on the unit. Below is a list of the pin assignments wired to Cont. B for interface with external control devices:
The pin numbers start from right to left 1-13 on first row and 14-25 on the second row. To supply power from an external power supply unit (DC power), use the Control Input and DC Input Terminal (CONT A) or the Control I/O Connector (CONT B) DC in and GND pins.
Power supply specifications: DC +9-24 V, 450 mA. The DC OUT pin of the Control I/O Connector (CONT B) can be used as power supply for a sensor, etc.
Caution: For safety reasons, do not connect the DC IN + pin of the Control Input and DC Input Terminal (CONT A) to metal parts such as the chassis or the Control I/O Connector (CONT B).
The pin outs are as follows:
Pin No. Signal Name
1 1/INC
2 2
3 3/DEC
4 4
5 5/EXCHANGE
6 6
7 7
8 8
9 9/START
10 STOP
11 COM
12 COM
13 BUSY OUT
14 NC
15 CONT OUT
16 GND
17 NC
18 NC
19 NC
20 NC
21 DC OUT
22 GND
23 GND
24 DC IN (+9-24 V, 450 mA)
25 DC IN (+9-24 V. 450 mA)
* Pins 1-9 are Control Inputs
* Pin 13 - 15 are Control Outputs