A footswitch connected to the VM-3100 can be used to select Scene Memories. Use
the following procedure to activate the footswitch function for changing Scene
Memories:
1) Connect a footswitch to the FOOTSWITCH jack on the rear of the unit.
2) Press SYSTEM.
3) Use the CURSOR buttons to display "FootSW Func."
4) Use the VALUE dial to select either "SCENE+," which calls up the next scene
or "SCENE-," which calls up the previous scene.
the following procedure to activate the footswitch function for changing Scene
Memories:
1) Connect a footswitch to the FOOTSWITCH jack on the rear of the unit.
2) Press SYSTEM.
3) Use the CURSOR buttons to display "FootSW Func."
4) Use the VALUE dial to select either "SCENE+," which calls up the next scene
or "SCENE-," which calls up the previous scene.