On the rear panel of the RSS-303M, you.ll find two pairs of XLR inputs:
- Use LINE INPUT A & B to send your main stereo source material into the RSS-303M.
- Use AUX INPUT A & B to connect a secondary stereo source, such as a pair of microphones.
- There is also a 9-pin D-Sub connector labeled "ORGAN INPUT." Use this to connect to the output of compatible Rodgers organs.
- Use LINE INPUT A & B to send your main stereo source material into the RSS-303M.
- Use AUX INPUT A & B to connect a secondary stereo source, such as a pair of microphones.
- There is also a 9-pin D-Sub connector labeled "ORGAN INPUT." Use this to connect to the output of compatible Rodgers organs.