The DIF-AT can link an RMDB2 compatible device (such as the VM-3100Pro or the VM-7100/7200 Mixer Processors with the optional VM-24E Expansion Board installed) and an ADAT deck. The DIF-AT provides the interface necessary so that an RMDB2 equipped device can control an ADAT. Use the following procedures for connecting the DIF-AT to an ADAT deck and to RMDB2 compatible devices:
- Connect the Optical In of the ADAT to the Optical Out of the DIF-AT.
- Connect the Optical Out of the ADAT to the Optical In of the DIF-AT.
- Connect the Sync In of the ADAT to the ADAT Sync of the DIF-AT.
- Connect the RMBD2 connection from the DIF-AT to the RMBD2 connection of the VM-3100Pro or the VM-7100/7200 Mixer Processor.
NOTE: To connect the RMBD2 connectors, you must use the provided RMBD2 cable, or cables which comply with the RMDB2 standard. Connecting with other cables, such as SCSI connection cables, may damage the devices you are trying to connect to.