| In offline mode, you need to make sure the REAC B Output Patchbay has patched all desired sources to REAC B Output ports. You can then assign these REAC B Output ports to Groups in your virtual M-48. Make all other Virtual M-48 settings as desired. If you want to transfer these virtual settings to a real M-48, go to the M-48 Manager window and select Library. Select an open Library number and select Store. Name your Library Store and select Store. Save your newly modified Project file: FILE > SAVE PROJECT AS. Copy the new Project file to the PROJ folder of your USB stick. Put the USB stick in your M-400. Go to SYSTEM > LOAD/SAVE. In the Load Section filter, you may want to selct M48 Library only so you aren't loading any errant data from your offline M-400 project. After loading, that new M48 Library entry will be available to any of your M-48 unit. To copy it over, go to M-48 Manager, highlight the target M-48 unit, select Library, highlight your newly made Library file and select Recall. The selected M-48 will load all those settings. Repeat for every M-48 unit or Library Store that you have. |