V-80HD: How do I recall and start this unit with a certain scene memory?

You can save the current settings to the scene memories of the V-80HD, including the video/audio settings and the state of the operating panel, and recall those settings for use when necessary.

The V-80HD features 32 scene memories.

* The demo data in this unit includes some scene memories by factory default.

Follow the steps below.

Saving to a scene memory

Only for scene memories 1–8

1. Press the [MODE] button several times to select “MEMORY”.
   
2. Long-press the MEMORY button for the number where you want to save the settings.
   
   All of the MEMORY [1]–[8] buttons briefly light up light blue, and the current settings are saved in the selected preset memory.

Scene memories 1–32

1. Press the [MENU] button > “Scene Memory” > select “Save/Load”, and press the [VALUE] knob.
   
   The Scene Memory setup screen appears.
2. Use the [VALUE] knob to select “Save”, and then press the [VALUE] knob.
   The “Save” text blinks.
3. Use the [VALUE] knob to select the save destination scene memory number, and press the [VALUE] knob.
   
   A confirmation message appears.
4. Select “OK” and press the [VALUE] knob.
   This saves the current settings to the selected scene memory.

Recalling and starting with a scene memory

If you want the unit to recall a scene memory when it starts up, press the [MENU] button > “Scene Memory” > “Start Up” to specify the scene memory number.