Articles
- AR-2000: Repeat Playback of Pattern Phrase
- AR-2000: RS-232/422A Specifications
- AR-2000: RS-232C Connector
- AR-2000: RS-422A Conncetor Configuration
- AR-2000: Set-Up for Triggering Messages Incrementally Using Barrier Strip Contacts
- AR-2000: Setting MIDI OUT/THRU
- AR-2000: Setting the Baud Rate for the RS-232C/422A Connectors
- AR-2000: Setting the Control Output
- AR-2000: Setting the Delay Time
- AR-2000: Setting the MIDI Device ID
- AR-2000: Setting the MIDI Receive Channel
- AR-2000: Setting the Playback Volume
- AR-2000: Setting the Record Type
- AR-2000: Setting the Repeat Playback Time
- AR-2000: System Copy
- AR-2000: Trigger Record Settings
- AR-2000: Updating the AR-2000 Using a Memory Card
- AR-2000: Updating the AR-2000 Using Standard MIDI Files
- AR-200R - I formatted a CF card in an AR-200R and it works OK there. But when I try to use that same card in another AR-200R, it won't play.
- AR-200S - How do I format a Memory Card using the AR-200S?
- AR-200S - I'm trying to operate my AR-200S from Hyperterminal in Windows. How do I send the stx command they talk about in the RS232 manual?
- AR-3000IP - I've set my IP address, subnet and gateway on the AR-3000IP. I know they are good addresses on my network, but I can't connect via FTP or Telnet.
- AR-3000SD: How To Import Audio Files Into Phrases
- AR-3000SD: Secure Digital (SD) Card Compatibility Guidelines
- Are there keyboard short cuts for V-Mixer RCS?
- Basic signal flow for the VM-7000 series mixers
- Can I playback multi-channels from Sonar to a V-Mixer?
- Can I use an RS-232 to Cat5 converter to connect my laptop and RCS into the stage box?
- Cat6 for the Roland Digital Snake?
- CG-8 - I get some flickering/lines in my video output once in a while. Any ideas?