You can mix an external signal (MC-303, VT-1, turntable, etc.) with the SP-202 sounds:
1. Set the Source Select switch to LINE.
2. Set the Source Mix switch to ON.
3. Plug the output of the external device into the LINE IN jacks on the back of the SP-202.
4. Press REC and turn the CONTROL dial to set the level of the external device.
5. Press CANCEL to return to the SP-202 sounds
1. Set the Source Select switch to LINE.
2. Set the Source Mix switch to ON.
3. Plug the output of the external device into the LINE IN jacks on the back of the SP-202.
4. Press REC and turn the CONTROL dial to set the level of the external device.
5. Press CANCEL to return to the SP-202 sounds