Use the following procedure to add effects to a Pattern with the GRAB switch:
1. Press PTN, then press PRESET.
2. Use the VALUE dial to select Pattern #40 "New Electro 1."
3. Press PLAY.
4. Push the GRAB switch to ON and listen to the Pattern with effects.
5. You can use the ASSIGNABLE KNOBS 1-4 to change the effects parameters in real time.
6. Pull down on the GRAB switch and switch between OFF and GRAB. This allows you hear the Pattern with realtime on/off control of the effects.
7. Press STOP to end playback.
1. Press PTN, then press PRESET.
2. Use the VALUE dial to select Pattern #40 "New Electro 1."
3. Press PLAY.
4. Push the GRAB switch to ON and listen to the Pattern with effects.
5. You can use the ASSIGNABLE KNOBS 1-4 to change the effects parameters in real time.
6. Pull down on the GRAB switch and switch between OFF and GRAB. This allows you hear the Pattern with realtime on/off control of the effects.
7. Press STOP to end playback.