The SP-303 has 26 killer effects. These effects can be applied to multiple samples simultaneously or they can be applied to live input signal. Filter + Drive, Pitch, Delay, Vinyl Sim, and Isolator can be accessed directly by pressing the corresponding button. Use the following procedure to apply effects:
1. Press a numbered PAD to select and play a sample.
2. Press an effect button under DSP EFFECTS (i.e. FILTER).
The MFX button controls 21 additional effects that can be selected one at a time. Use the following procedure to select an MFX effect:
1. Press a numbered PAD to select and play a sample.
2. While holding MFX turn the CTRL 3/MFX knob to select one of the 21 MFX algorithms.
1. Press a numbered PAD to select and play a sample.
2. Press an effect button under DSP EFFECTS (i.e. FILTER).
The MFX button controls 21 additional effects that can be selected one at a time. Use the following procedure to select an MFX effect:
1. Press a numbered PAD to select and play a sample.
2. While holding MFX turn the CTRL 3/MFX knob to select one of the 21 MFX algorithms.