Use the following procedure to assign patterns to send MIDI out.
1. Press PTN to put the MC-307 in Pattern Mode.
2. Press F2 "STUP."
3. Press F1 "PART."
4. CURSOR Down to the last page. You should see "SEQ OUT."
5. Press "Part Select."
6. Press the button for the part you want to edit. ( R 1-7 )
7. Use the VALUE DIAL to set your MIDI out to "EXT", or "BOTH."
8. Repeat steps 6 and 7 for each part you want to edit.
9. Press EXIT twice.
1. Press PTN to put the MC-307 in Pattern Mode.
2. Press F2 "STUP."
3. Press F1 "PART."
4. CURSOR Down to the last page. You should see "SEQ OUT."
5. Press "Part Select."
6. Press the button for the part you want to edit. ( R 1-7 )
7. Use the VALUE DIAL to set your MIDI out to "EXT", or "BOTH."
8. Repeat steps 6 and 7 for each part you want to edit.
9. Press EXIT twice.