Use the following steps to adjust the sensitivity for a pad in the TD-9:
1. Press SETUP.
2. Press F1 (TRIGGER).
3. Press F2 (SENS).
4. Hit the desired pad to be adjusted.
5. Press the (+) or (-) button to increase the sensitivity.
6. Repeat Steps 4 and 5 for any remaining pads.
7. Press KIT when you're finished.
1. Press SETUP.
2. Press F1 (TRIGGER).
3. Press F2 (SENS).
4. Hit the desired pad to be adjusted.
5. Press the (+) or (-) button to increase the sensitivity.
6. Repeat Steps 4 and 5 for any remaining pads.
7. Press KIT when you're finished.