You can transmit and receive audio and MIDI data by connecting a USB cable from your mobile device (smartphone or tablet) to this unit.
You don’t need to install a driver on your device to do this (the unit supports USB Audio Device Class 2.0 specs).
Important Note: Android devices are not guaranteed to work with this unit.
- Data cannot be directly transmitted/received between this unit and your mobile device if you’re connecting through a USB hub.
- The S-1 must be powered up in battery mode so that the USB connector is not charging the S-1 from the mobile device. This will ensure that the S-1 is being used as an audio/MIDI interface.
- While holding down the [C (EXIT)] button, turn on the power. This powers up the unit in battery-only mode.
- Use an Apple-manufactured USB adaptor (such as the Lightning-USB Camera Adapter, the Lightning to USB 3 Camera Adapter and so on) as a converter for the iOS device’s connector.
- Use a USB cable (USB Type-C to USB Type-A cable, included) to connect this unit to the USB adaptor.
- The included cable is capable of data transfer, some cables are meant for charging and cannot transmit data. If you must replace the cable, please ensure that it is capable of data transfer.
- Commercially available USB Type-C to Lightning conversion cables cannot be used.
Please refer to the S-1 Owner's Manuals for more information.