Here’s how to adjust the volume of each pad.
- Make sure that the [SELECT] button is extinguished. If it is lit, press the [SELECT] button to turn it off.
- Press the pad to which the sample whose volume you want to adjust is assigned.
The pad will light, and that sample will play. - Press the [START/END/LEVEL] button so the button is lit.
- Turn the [CTRL 3] (LEVEL) knob to adjust the sample’s volume.
- When you’ve finished making adjustments, press the [START/END/LEVEL] button to turn off its light.
Turning the [CTRL 3] (LEVEL) knob toward the left will reduce the volume, and turning it toward the right will increase the volume. A setting of 127 is the maximum volume. The default value immediately after sampling is 127.
MEMO
While the [START/END/LEVEL] button is lit, you can adjust not only the volume but also the start point and end point by using the [CTRL 1] and [CTRL 2] knobs. If you’ve moved the [CTRL 1] or [CTRL 2] knobs
by accident, set them back to the center position. The settings will return to their previous values. If you press
the [START/END/LEVEL] button to turn off the button’s light without returning the knobs to the center, the modified start point and end point settings will be set.