SP-404A: Saving a Backup to the SD card

Saving Backup Data (Backup Save)

This operation will save backup data (all data including sample banks and pattern banks) to the SD card. You can save up to 12 backups.

MEMO
If you’ve saved numerous samples and patterns on a card, and it doesn’t have much space remaining, you’ll only be able to save a small number of backup sets.

1. Hold down the [SHIFT] button and press the pad [6] (BACKUP SAVE).
   - The display will indicate “SAU,” and the pads to which backup data has not been saved will blink.
2. Select the desired save-destination pad.
   - The selected pad will light, the other pads will go out, and the [REC] button will light.
   MEMO
   If you decide to cancel, press the [CANCEL] button.
3. Press the [REC] button.
   - The [REC] button will light, and the backup save operation will be executed. During execution, the dot in the display will blink. When the blinking stops, the backup save operation has been completed.

NOTE
Never turn off the power while the dot is blinking. Doing so may destroy the SD card.