How to change the Master output attenuator level
1. While holding down the [PANEL] button, press the [POWER] switch to turn on the power.
The DJ-808 is in system setting mode, and the [START/STOP] button of the TR-S section is blinking.
2. Press the TR-S pad or button that corresponds with the setting you want to make.
The display shows the current value.
3. Use the [VALUE] knob to change the value of the setting.
TR-S pad [2] Default setting in Bold.
Master output attenuator level 0, -3, -6, -12, -18 (dB) Specifies the attenuation level of the master output. The master output level decreases by the amount of this value.
4. When you’ve finished making settings, press the blinking [START/STOP] button.
The display shows “U-ait,” and after a while returns to the normal state.
Pad/Button Item Value Explanation