DJ-808: Changing the Margin setting, Cross Fader (System Setting) PAD 7

How to change the Margin at both ends of cross fader

1. While holding down the [PANEL] button, press the [POWER] switch to turn on the power.
   The DJ-808 is in system setting mode, and the [START/STOP] button of the TR-S section is blinking.
2. Press the TR-S pad or button that corresponds with the setting you want to make.
   The display shows the current value.
3. Use the [VALUE] knob to change the value of the setting.
   TR-S pad [7]  Default setting in Bold.
4. Specifies the margin at both ends of the cross fader. Higher values increase the margin, providing more play at each end of the cross fader.
   Margin at both ends of cross fader 0, 1–10
5. When you’ve finished making settings, press the blinking [START/STOP] button.
   The display shows “U-ait,” and after a while returns to the normal state.