How to Swap the USB outputs from 1 and 3 to 2 and 4.
1. While holding down the [PANEL] button, press the [POWER] switch to turn on the power.
The DJ-808 is in system setting mode, and the [START/STOP] button of the TR-S section is blinking.
2. Press the TR-S pad or button that corresponds with the setting you want to make.
The display shows the current value.
3. Use the [VALUE] knob to change the value of the setting.
TR-S pad [12] Default setting in Bold.
Swap channels On, OFF
Specifies whether the PC (USB) outputs of channels 1 and 3 and channels 2 and 4 are swapped.
On Swap the outputs of channels 1 and 3 and channels 2 and 4.
OFF Don’t swap. The outputs are as printed on the panel.
4. When you’ve finished making settings, press the blinking [START/STOP] button.
The display shows “U-ait,” and after a while returns to the normal state.
Pad/Button Item Value Explanation