Demo mode time setting
1. While holding down the [PANEL] button, press the [POWER] switch to turn on the power.
The DJ-808 is in system setting mode, and the [START/STOP] button of the TR-S section is blinking.
2. Press the TR-S pad or button that corresponds with the setting you want to make.
The display shows the current value.
3. Use the [VALUE] knob to change the value of the setting.
TR-S pad [14] Default setting in Bold.
Demo mode time setting OFF, 1–10–30
Specifies the time (minutes) from when the DJ-808 was last operated until it enters demo mode.
If this is OFF, demo mode will not operate
4. When you’ve finished making settings, press the blinking [START/STOP] button.
The display shows “U-ait,” and after a while returns to the normal state.
Pad/Button Item Value Explanation