TRS section knob settings
1. While holding down the [PANEL] button, press the [POWER] switch to turn on the power.
The DJ-808 is in system setting mode, and the [START/STOP] button of the TR-S section is blinking.
2. Press the TR-S pad or button that corresponds with the setting you want to make.
The display shows the current value.
3. Use the [VALUE] knob to change the value of the setting.
TR-S pad [16] Default setting in Bold.
TRS section knob mode Pick (Pick), JUNP (Jump)
Specifies how the knobs in the TR-S section operate.
Pick
If there is a discrepancy between the recalled value and the position of the
knob, data is output only after you turn the knob to the position that matches
the value.
Jump
Data is always output according to the position of the knob.
4. When you’ve finished making settings, press the blinking [START/STOP] button.
The display shows “U-ait,” and after a while returns to the normal state.
Pad/Button Item Value Explanation