Adjusting the Performance Pad Sensitivity (System Setting)
1.While holding down the [PANEL] button, press the [POWER] switch to turn on the power.
The DJ-808 is in system setting mode, and the [START/STOP] button of the TR-S section is blinking.
2.Press the performance pad whose sensitivity you want to adjust.
The pad you press is lit red.
3.Use the [VALUE] knob to change the value of the setting.
Display (Value) Explanation
0–300 The lower the value, the greater the sensitivity.
The factory setting is 50.
* If the sensitivity is too great, vibrations of the DJ-808 itself might make the pad operate unintendedly.
Take care not to make the sensitivity excessive.
4.When you’ve finished making settings, press the blinking [START/STOP] button.
The display shows “U-ait,” and after a while returns to the normal state