Follow the steps below to update the system program of the TB-3.
Before proceeding, download the system program and review the update history, system requirements, and precautions on the TB-3 System Program page.
How to Check the System Program Version
Before proceeding, check the current system program version of the TB-3.
- Turn off the power of the TB-3.
- While holding down the [STEP REC] and [REALTIME REC] buttons, turn on the power.
- Step [1] of the 16-step indicators and the [▶/■] button blink.
- Press the [▶/■] button.
The current version appears in the display as three digits. For example, version 1.10 is displayed as "110." - After confirming the version, turn off the TB-3 without pressing any other buttons.
Important: If the TB-3 is already running the version available on the TB-3 System Program page, you do not need to perform the update.
Downloading and Extracting the Update File
- Open the TB-3 System Program page.
- Read the software license agreement, select the "I agree" check box, and download the system program.
- Extract the downloaded compressed file.
- Windows: Right-click the downloaded file, select "Extract All," and then select "Extract."
- macOS: Double-click the downloaded file to extract it.
The extracted folder appears.
Note: Do not rename the extracted folder or the files inside it.
Update Procedure
- Never use this update file with any product other than the TB-3. Doing so may damage the data or system program of the other product.
- Never turn off the TB-3 while the update is in progress. If the update is interrupted, the TB-3 might no longer start normally and may require servicing.
- Turn off the power of the TB-3.
- Access the following page to download and extract the latest system program.
https://www.roland.com/global/support/by_product/tb-3/updates_drivers/ - While holding down the [KEYBOARD] and [PTN SELECT] buttons, turn on the power.
The KEYBOARD, XY PLAY, ENV MOD, PTN SELECT, SCATTER, STEP REC, REALTIME REC, and [▶/■] buttons will start flashing. - Connect the TB-3 to the computer using a USB cable.
The TB-3 is recognized as an external drive. Depending on the computer settings, the drive might not open automatically. - On the computer, open the "TB-3" drive.
- From the extracted folder, copy only the TB3_UPD.BIN file to the root level of the "TB-3" drive.
Important: Do not copy the entire extracted folder. Copy only the TB3_UPD.BIN file. - After the file has been copied, safely eject the "TB-3" drive from the computer.
- Windows: Refer to “Safely remove hardware in Windows” (Microsoft website)
- macOS: Drag the "TR-8" icon to the Trash in the Dock.
- Disconnect the USB cable.
The [XY PLAY] button lights. - Press the [XY PLAY] button to begin the update.
The update will begin.
The C pad on the right side lights, and the following buttons blink: [KEYBOARD], [XY PLAY], [ENV MOD], [PTN SELECT], [SCATTER], [STEP REC], [REALTIME REC], [▶/■], [-OCT], [+OCT], [CLEAR/REST], [ACCENT], [SLIDE], and [SLIDE/TIE].
Wait until the update is complete. - Check the system program version again to confirm that the update was completed successfully.