Use the following procedure to update the TR-8 system program.
Before proceeding, download the system program and review the update history and precautions on the TR-8 System Program page.
How to Check the System Program Version
Before proceeding, check the system program version of the TR-8.
- Turn off the power.
- While holding down pads [14] and [16], turn on the power.
The [START/STOP] button blinks. - Press the [START/STOP] button.
The current version appears in the display as three digits. For example, version 1.61 is displayed as "161." - After confirming the version, turn off the TR-8 without pressing any other buttons.
Important: If the TR-8 is already running the latest version, you do not need to perform the update.
What You Need for the Update
- TR-8
- Included AC adaptor
- USB cable
- Computer with a USB port
Downloading and Extracting the Update File
- Open the TR-8 System Program page.
- Read the software license agreement, select the "I agree" check box, and download the system program.
- Extract the downloaded tr8_sys_vXXX.zip file.
- Windows: Right-click the file, select "Extract All," and then select "Extract."
- macOS: Double-click the file to extract it.
The tr8_sys_vXXX folder appears.
Note: "XXX" indicates the version number. Do not rename the extracted folder or the files inside it.
Update Procedure
- Never use this update file with any product other than the TR-8. Doing so may damage the data or system program of the other product.
- Never turn off the TR-8 while the update is in progress. If the update is interrupted, the TR-8 might no longer start normally and may require servicing.
- Turn off the power.
- While holding down Pad [1], turn on the power.
The INST select buttons [BD] through [RC] blink. - Use a USB cable to connect the TR-8 to the computer.
The [BD] button and pad [1] blink. - On the computer, open the "TR-8" drive.
- Open the extracted tr8_sys_vXXX folder, and drag the TR8_UPD.BIN file to the root level of the "TR-8" drive.
Important: Copy only the TR8_UPD.BIN file. Do not copy the tr8_sys_vXXX folder. - After the file has been copied, safely eject the "TR-8" drive from the computer.
- Windows: Refer to “Safely remove hardware in Windows” (Microsoft website)
- macOS: Drag the "TR-8" icon to the Trash in the Dock.
- Disconnect the USB cable.
The [SD] button and pad [2] blink. - Press pad [2] to begin the update.
The [LT] button and pad [3] blink, and the SCATTER LEDs light in sequence from 1 through 10.
Wait until the INST select buttons [BD] through [RC] and pads [1] through [16] blink.
The update is complete when these buttons and pads are blinking. - Turn off the TR-8.
- Check the system program version again to confirm that the update was completed successfully.