MC-202 MICRO COMPOSER
MICRO COMPOSER SECTION
MEMORY CAPACITY:
Approx. 2600 Steps
OUTPUT:
External CV Output
If the MC - 202s Keyboard is in use : 416. 5mV to 5V, 44
Steps
If the External Keyboard is in use : 0 to 5V, 49 Steps (83.3mV
/ Step) : 1
External Gate Output (When OFF : 0V, ON : 12V)
Built - In CV Output: 1
Built - In Gate Output: 1
INPUT (Keyboard Input): CV IN (0V to 5V) : 1
GATE IN (Turned on With Over + 3V): 1
Calibration Trimmer: 1
TAPE INTERFACE:
MEMORY SAVE (TAPE SYNC OUT) : 1
MEMORY LOAD (TAPE SYNC IN) : 1
DIN SYNC:
DIN Socket IN: 1
OUT: 2
TEMPO:
Tempo Knob (Quarter note = 40 to 300): 1
DISPLAY:
Liquid Crystal Display: 1
Indicator: 1
SYNTHESIZER SECTION
KEYBOARD: 32 Key, F scale
VCO:
Range (16, 8, 4)
Pulse Width Modulation (50% to Min.)
PWM Selector Switch (ENV / MAN / LFO)
Modulation Depth
Tune ( + 100 Cent)
SOURCE MIXER:
VCF:
Cutoff Frequency (10 Hz to 20 kHz)
Resonance (0 to Self Oscillation)
ENV Depth
Modulation Depth
Keyboard Follows (0 to 100%)
VCA:
Control Signal Selector Switch (ENV ????? / GATE ???? )
ENV:
Attack Time (2ms to 1.5s)
Decay Time (2ms to 5s)
Sustain Lever (0 to 100%)
Release Time (1ms to 5s)
LFO:
LFO Rate (o.1 Hz to 30 Hz)
LFO Rate Indicator
Decay Time (0 to 1s)
PORTAMENTO:
Portamento Time (0 to 2s)
ACCENT
VOLUME
CONNECTION JACKS:
Output (0 dBm max.)
Headphones (Stereo 8W to 150W)
DC Input (9V to 12V AC Adaptor PSA - 120, 220 or 240)
POWER SWITCH:
POWER:
DC 9V (C cell x 6 or PSA - 120, 220 or 240)
CONSUMPTION:
800 mW
DIMENSIONS:
343 (W) x 55 (H) x 204 (D) mm
13 - 1 / 2 (W) x 2 - 3 / 16 (H) x 8 (D) inches
WEIGHT (Batteries Included):
1.35kg (3 lb.)
ACCESSORIES:
2.5m Connection Cable PJ-1 x 1
Sample Tape (For Demonstration) x 1
C Cell Batteries (BR-2) x 6
Operation Manual x 1
OPTIONS:
Headphones: RH-10
AC Adaptor: PSA-120, 220, 240
MICRO COMPOSER SECTION
MEMORY CAPACITY:
Approx. 2600 Steps
OUTPUT:
External CV Output
If the MC - 202s Keyboard is in use : 416. 5mV to 5V, 44
Steps
If the External Keyboard is in use : 0 to 5V, 49 Steps (83.3mV
/ Step) : 1
External Gate Output (When OFF : 0V, ON : 12V)
Built - In CV Output: 1
Built - In Gate Output: 1
INPUT (Keyboard Input): CV IN (0V to 5V) : 1
GATE IN (Turned on With Over + 3V): 1
Calibration Trimmer: 1
TAPE INTERFACE:
MEMORY SAVE (TAPE SYNC OUT) : 1
MEMORY LOAD (TAPE SYNC IN) : 1
DIN SYNC:
DIN Socket IN: 1
OUT: 2
TEMPO:
Tempo Knob (Quarter note = 40 to 300): 1
DISPLAY:
Liquid Crystal Display: 1
Indicator: 1
SYNTHESIZER SECTION
KEYBOARD: 32 Key, F scale
VCO:
Range (16, 8, 4)
Pulse Width Modulation (50% to Min.)
PWM Selector Switch (ENV / MAN / LFO)
Modulation Depth
Tune ( + 100 Cent)
SOURCE MIXER:
VCF:
Cutoff Frequency (10 Hz to 20 kHz)
Resonance (0 to Self Oscillation)
ENV Depth
Modulation Depth
Keyboard Follows (0 to 100%)
VCA:
Control Signal Selector Switch (ENV ????? / GATE ???? )
ENV:
Attack Time (2ms to 1.5s)
Decay Time (2ms to 5s)
Sustain Lever (0 to 100%)
Release Time (1ms to 5s)
LFO:
LFO Rate (o.1 Hz to 30 Hz)
LFO Rate Indicator
Decay Time (0 to 1s)
PORTAMENTO:
Portamento Time (0 to 2s)
ACCENT
VOLUME
CONNECTION JACKS:
Output (0 dBm max.)
Headphones (Stereo 8W to 150W)
DC Input (9V to 12V AC Adaptor PSA - 120, 220 or 240)
POWER SWITCH:
POWER:
DC 9V (C cell x 6 or PSA - 120, 220 or 240)
CONSUMPTION:
800 mW
DIMENSIONS:
343 (W) x 55 (H) x 204 (D) mm
13 - 1 / 2 (W) x 2 - 3 / 16 (H) x 8 (D) inches
WEIGHT (Batteries Included):
1.35kg (3 lb.)
ACCESSORIES:
2.5m Connection Cable PJ-1 x 1
Sample Tape (For Demonstration) x 1
C Cell Batteries (BR-2) x 6
Operation Manual x 1
OPTIONS:
Headphones: RH-10
AC Adaptor: PSA-120, 220, 240