SP-404SX: Formatting an SD Card

Use the following procedure to format a SD card in the SP-404SX.

NOTE
• When you format an SD card, all data on that card will be erased
• Do not format the SD card included with the SP-404SX!
The included SD card contains preload data All of this data will be lost if you format the included SD card.

1. While holding down the [CANCEL] button, press the [REMAIN] button.
   
   
   The BANK buttons will blink, and the display will indicate “F N t ”
2. Press any one of the [BANK] buttons.
   
   The BANK buttons will change from blinking to lit, and the DEL button will blink. If you decide not to format the card, press the CANCEL button.
3. Press the [DEL] button.
   
   The DEL button will light, and formatting will begin. During the formatting process, the dot in the display will blink. When the blinking stops, formatting is complete.

NOTE
• Never turn off the power while the dot is blinking Doing so may damage the SD card, rendering it unusable.
• Don’t modify or delete the files or folders that are created when an SD card is formatted The SP-404SX will not recognize the card correctly if you do so.