Here's how to change the MX-1 Level Fader Mode:
1. While holding down the [GAIN] button, turn on the power.
2. Press the pad [1].
- Unlit (Jump): If you've recalled a scene memory and the physical position of a fader differs from the value that was recalled, operating that fader causes the value to jump immediately to the fader position.
- Lit (Pass through) If you've recalled a scene memory and the physical position of a fader differs from the value that was recalled, fader movement is ignored until the fader passes through the recalled value.
3. Press the [START/STOP] button to save settings